Getting Started
R&S
®
SMBV100B
80
User Manual 1178.4460.02 ─ 03
To close a dialog box
To close a dialog box, you have the same controls as you know from computers or
devices with touchscreen.
► Perform one of the following actions:
● Tap the "Close" icon in the upper right corner.
● Press the [Esc] key on the front panel.
● Drag and drop a minimized dialog from the taskbar to the block diagram.
To select an option in a dialog box
► Tap the required option.
To select an option in a list
If many options are available - for example, for the trigger mode - the options are provi-
ded in a list. The current selection is shown on the list button.
► Tap in the list, scroll in the list and then tap the required option.
Or:
Use the rotary knob
Or:
Use [On/Off Toggle] key to select the succeeding option
Or:
Use the front panel keys:
a) Press the [Left/Right] arrow keys to navigate to the list button.
b) Press the [Enter] key to open the list.
c) Press the [Up/Down] keys to navigate to the required option in the list.
d) Press the [Enter] key to select the marked option.
2.5.5
Entering Data
Some parameters have their own key on the front panel.
For data input in dialog boxes, the instrument provides on-screen keypads for entering
numeric and alphanumeric values. Thus, you can always set the parameters via the
touchscreen, the front panel, or an external keyboard.
Correcting an entry
1. Using the arrow keys, move the cursor to the right of the entry you want to delete.
2. Press the [Backspace] key.
3. Deletes the entry to the left of the cursor.
4. Enter your correction.
Instrument Control
