manualshive.com logo in svg

Rohde & Schwarz SMBV100B, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz SMBV100B Скачать руководство пользователя страница 577

Network Operation and Remote Control

R&S

®

SMBV100B

575

User Manual 1178.4460.02 ─ 03

Changing the LAN configuration

This function is password-protected. Unlock the protection level 1 to access it.

Note:

 We recommend that you change the default password before connecting the

instrument to a network.
See 

Chapter 10.5.4, "Password Management"

, 

on page 545.

Ping Client

The "Ping Client" page provides the ping utility to verify the connection between the
LXI-compliant instrument and another device.

The ping is initiated from the instrument. Using the 

ICMP

 echo request and echo reply

packets, this function checks whether the communication with a device via LAN is
working. Ping is useful for the diagnosis of IP network or router failures.

To initiate a ping at the instrument:

1. On the "Ping Client" page, enter the IP address of the host in the "Destination

Address" field (for example 10.113.1.151).

2. Select "Submit".

SCPI Remote Trace

The remote trace functionality allows you to trace input and output strings at the
remote control interface of the R&S

 

SMBV100B, see 

Chapter 11.9, "Tracing SCPI

Commands and Messages Exchanged via the LXI Web Browser Interface"

,

on page 587.

A recorded trace (message log) can be evaluated directly in the dialog. Use the high-
lighting and navigation functions provided by the lower toolbar to locate error mes-

LXI Settings

Содержание SMBV100B







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды