Rohde & Schwarz SMBV100B, Руководство пользователя

Страница: 501 / 1030

File and Data Management
R&S
®
SMBV100B
499 User Manual 1178.4460.02 ─ 03
3. Enable "SMB (Samba)"
4. Enter the "Security Password".
The default password is 123456 . For more information, refer to Chapter 10.5,
"Using the Security Settings" , on page 535.
5. Select "Accept".
To enable file transfer via USB
1. Select "System Config > Setup > Security > Security > General"
2. Enable "USB Storage"
3. Enter the "Security Password".
The default password is 123456 . For more information, refer to Chapter 10.5,
"Using the Security Settings" , on page 535.
4. Select "Accept".
9.9.2 Accessing the File System of the R&S SMBV100B Via ftp
If the R&S SMBV100B is connected to a LAN, you can use file transfer protocol (ftp) to
access the file system and to transfer files from and to the instrument.
For information on how to set up a LAN connection, refer to:
●
Chapter 2.1.4, "Setting Up a Network (LAN) Connection" , on page 37
●
Chapter 11, "Network Operation and Remote Control" , on page 550
To access the file system via ftp
We assume that the instrument and the remote PC are connected to a LAN.
1. Enable file transfer via ftp
2. Enable write permission on the file system
3. On the remote PC, start the Windows Explorer.
4. In the address field, enter
ftp://<"IP Address" of the Instrument>
, e.g.
ftp://10.124.0.166 .
Tip: The R&S SMBV100B indicates its IP address on the block diagram.
A log-on dialog opens and requests a password.
The default user name and password is instrument .
Tip:
Default password
The FTP and SAMBA file access use the user "instrument" with default password
"instrument".
We recommend that you change this password in the "Setup > Security > Pass-
word Management > Change User Password" dialog before connecting the instru-
ment to the network.
How to Transfer Files from and to the Instrument