Remote Control Commands
R&S
®
SMBV100B
624
User Manual 1178.4460.02 ─ 03
:MMEMory:DATA
<Filename>, <BinaryBlock>
:MMEMory:DATA?
<Filename>
The setting command writes the block data
<BinaryBlock>
to the file identified by
<Filename>
.
Tip:
Use this command to read/transfer stored instrument settings or waveforms
directly from/to the instrument.
Parameters:
<BinaryBlock>
#<number><length_entry><data>
#
: Hash sign; always comes first in the binary block
<number>
: the first digit indicates how many digits the subse-
quent length entry has
<length_entry>
: indicates the number of subsequent bytes
<data>
: binary block data for the specified length.
For files with a size with more than nine digits (gigabytes), the
instrument allows the syntax
#(<Length>)
, where
<Length>
is the file size in decimal format.
Parameters for setting and query:
<Filename>
string
String parameter to specify the name of the file.
Example:
MMEMory:DATA '/var/user/test.txt',#15hallo
Writes the block data to the file
test.txt
.
The digit
1
indicates a length entry of one digit; the digit
5
indi-
cate a length of the binary data (
hallo
) in bytes.
MMEMory:DATA? '/var/user/test.txt'
Sends the data of the file
test.txt
from the instrument to the
controller in the form of a binary block.
Response: #15hallo
Usage:
SCPI confirmed
:MMEMory:DATA:UNPRotected
<Msus>, <Data>
The
setting
command sends the I/Q data and the marker data to the file defined with
the
<Msus>
parameter. The required tags are created automatically so that the file
content follows the waveform file format.
The
query
reads out the I/Q data part or the marker information of the specified file.
Waveform files can also be created with the command
. In this case, the
complete content
of the waveform file
must be specified, i.e. not only the I/Q or marker data but all required tags.
Chapter 3.6.5, "Tags for Waveforms, Data and Control Lists"
Parameters:
<Msus>
<Identifier>:<file name>
Mass Storage Unit Specifier
MMEMory Subsystem
