© REA Elektronik GmbH, Teichwiesenstraße 1 D-64367 Muehltal
REA VeriCube Operating Manual Version 2.16 – 11/2020
Page 35 of 119
7
Correct handling
7.1
General considerations
The REA VeriCube is an optical measurement device with a camera and built-in
lighting. The device should be lifted only by the recessed grips provided for this
purpose. The camera module should never be used as a handle.
Falls and impacts will damage the REA VeriCube
Picture Recessed grip
Picture of a built-in camera module
The network cable is locked in the socket. The lock is loosened with a small plastic
lever on the plug for removal. This socket/plug combination is relatively sensitive
mechanically (robust industrial plugs were deliberately not used because they are
very large and require expensive and special cables, which are hard to source). The
cable should not be pulled without releasing the lock. The plug should not be
subjected to any pulling, pressure or other impact. Any lateral strains lead to high
risk of damage. The pulling strains can lead to damage or destruction of the cable
and, additionally, of the socket installed in the device.
