© REA Elektronik GmbH, Teichwiesenstraße 1 D-64367 Muehltal
REA VeriCube Operating Manual Version 2.16 – 11/2020
Page 69 of 119
11.3
Automatic measurement mode
If the automatic mode is activated, the measurement does not have to be started
manually via the "Verify" button in TransWin32 or via the "Scan" button on the
verifier. In this mode the user positions the code so that it is in the crosshairs and
the software recognizes it. As soon as the software recognizes the code, this is
represented by a green square or red bars:
After a delay time, which is specified in the settings, the measurement is then
automatically triggered. The result is then displayed and after a further specified
waiting time, the live image is shown again so that the next sample can be
positioned.
In automatic mode, the test reports are always saved automatically in the file path
set in menu >Configure >Options >File Saving "Default data path" and in
TransWin32 Explorer only the last measurement is displayed ("single mode active" in
the display options). In order not to disturb the automatic process, requests for job
number, printing or saving are not displayed, even if this is selected in the settings.
These settings with prompts apply only to manual operation.
In the menu
>Configure, >Others, >Automatic mode, the mode is activated and the time settings
are made:
