© REA Elektronik GmbH, Teichwiesenstraße 1 D-64367 Muehltal
REA VeriCube Operating Manual Version 2.16 – 11/2020
Page 23 of 119
The power supply unit has an IEC socket for connecting to the electricity supply. The
mains cable is delivered adapted to the specified country standard according to the
part number supplied.
The socket type is C14 (IEC-60320). The plug type is C13.
Picture of a socket, low-power mains plug type
The power supply through the PoE is characterized by the fact that the power supply
unit first checks whether a connected device is designed for a PoE power supply. In
this test period, the device cannot yet be turned on.
As long as the testing takes place, no LED lights up on the Ethernet socket of the
REA VeriCube. As soon as the device receives power, the left LED lights up (light-
orange)
Picture of LED OFF
Picture of LED ON
ATTENTION: REA has a complete range of code verifiers in its product line.
In all products, the power supply utilises PoE power. The REA VeriCube
requires 30W type POI-3000 (or POI-3002 or POI-3004). The other devices
use the 15W type POI-2002. When these power supply units are
interchanged, the REA VeriCube gives the appearance of functioning.
However, the measurement and the lighting do not function correctly.
Therefore, the power supply units should not be interchanged.
6.4.1
Own Ethernet port
The PC has one or two network connections, one of which is used exclusively for the
operation of the VeriCube. The "Data/IN" socket of the power supply unit is
connected directly with a cable to this socket.
