© REA Elektronik GmbH, Teichwiesenstraße 1 D-64367 Muehltal
REA VeriCube Operating Manual Version 2.16 – 11/2020
Page 14 of 119
Warning:
Be careful with the glass cover. When the VeriCube is tilted,
it could slip out and fall down. Caution, danger of injury.
Warning:
Be careful with the glass cover. After a glass breakage, be
careful with possible glass splinters, danger of cutting.
Warning:
Caution when handling the VeriCube: Cutting danger of injury at
the corners and edges of the device.
Cleaning
If necessary, clean the housing with a damp (not wet) cloth.
Clean glass cover with a damp cloth (e.g. microfiber as attached with
shipment).
If necessary, clean the lense of the camera module and the mirror only
with special auxiliary means for optical lenses.
Attention: cleaning with solvents will destroy the device
Dust may only be removed with compressed air, if it is completely free of
oils and other contaminants. In dusty environments, it is recommended
to protect the device and cover it if possible.
Electrostatic sensitive parts
Electrostatic discharges should be avoided as they can destroy the device.
Functional test
It is recommended to do a monthly review (calibration) of the accuracy of
the verifier by measuring the supplied test code.(See Section 11 Calibration)
