© REA Elektronik GmbH, Teichwiesenstraße 1 D-64367 Muehltal
REA VeriCube Operating Manual Version 2.16 – 11/2020
Page 17 of 119
5
REA VeriCube Version
5.1
REA VeriCube Standard
The REA VeriCube, in the standard design, has 13 screws on the upper side. With the
exception of any two screws, all the others can be removed.
The plate is either in blue or silver in color. The screws have Torx T10 heads.
The screws are there to close the threaded holes. The threaded holes are provided
for fastening the used fixtures when, for example, auxiliaries and other measurement
aids must be affixed to the device. The advantage of this is that frequently made
measurements of identical products can be performed by the device without the
positioning aided by the live image function.
5.2
REA VeriCube Pharma
The REA VeriCube in the Pharma design has a closed plate at the top without screw
holes.
This design is intended for use in areas in which it must be possible to clean the
surface easily and quickly.
