Raritan PX-1000 Series, Руководство пользователя

Страница: 331 / 442

Chapter 7: Using the Command Line Interface
316
Specifying the Sensor Type
Raritan's contact closure sensor (DPX-CC2-TR) supports the connection
of diverse third-party detectors/switches, and you must specify the type of
connected detector/switch for proper operation. Use this command syntax
when you need to specify the sensor type.
config:# externalsensor <n> sensorSubType <type>
Variables:

<n> is the ID number of the environmental sensor that you want to
configure. The ID number is assigned and shown in the Dominion PX
web interface. It is an integer between 1 and 16.

<type> is one of these types: contact , smokeDetection ,
waterDetection or vibration .
Type Description
contact The connected detector/switch is for detection of
door lock or door closed/open status.
smokeDetection The connected detector/switch is for detection of
the smoke presence.
waterDetection The connected detector/switch is for detection of
the water presence.
vibration The connected detector/switch is for detection of
the vibration.
Example
The following indicates that a smoke detector is being connected to
Raritan's contact closure sensor (DPX-CC2-TR) whose ID number shown
in the Dominion PX web interface is 2.
config:# externalsensor 2 sensorSubType smokeDetection