Raritan PX-1000 Series, Руководство пользователя

Страница: 99 / 442

Chapter 5: Using the Web Interface
84
3. Type a new name in the Device Name field.
4. Click OK to save the changes.
Modifying the Network Configuration
The network settings you can change via the web interface include wired,
wireless, IPv4 and/or IPv6 settings.
Modifying the Network Interface Settings
The Dominion PX supports two types of network interfaces: wired and
wireless. You should configure the network interface settings according to
the networking mode that applies. See
Connecting the Dominion PX to
Your Network (on page 21).
Wired Network Settings
The LAN interface speed and duplex mode were set during the installation
and configuration process. See
Initial Network Configuration (on page
23).
By default, the LAN speed and duplex mode are set to "Auto" (automatic),
which works in nearly all scenarios. You can change them if there are
special local requirements.
To modify the network interface settings:
1. Choose Device Settings > Network. The Network Configuration dialog
appears.
2. The Interface Settings tab should have been selected. If not, click the
Interface Settings tab.
3. In the Network Interface field, click the drop-down arrow, and select
Wired from the list.
4. To change the LAN speed, click the drop-down arrow in the Speed
field and select an option from the list.

Auto: System determines the optimum LAN speed through
auto-negotiation.

10 Mbit/s: The LAN speed is always 10 Mbps.

100 Mbit/s: The LAN speed is always 100 Mbps.
5. To change the duplex mode, click the drop-down arrow in the Duplex
field and select an option from the list.

Auto: The Dominion PX selects the optimum transmission mode
through auto-negotiation.

Full: Data is transmitted in both directions simultaneously.

Half: Data is transmitted in one direction (to or from the Dominion
PX device) at a time.