Raritan PX-1000 Series, Руководство пользователя

Страница: 425 / 442

Appendix E: Integration
410
2. For that rack PDU, select the appropriate outlet from the Outlet Name
drop-down list.
3. From the Outlet Name drop-down list, select None.
4. Click OK. That rack PDU/outlet association is removed and a
confirmation message is displayed.
To remove a rack PDU association if the rack PDU has been
removed from the target:
1. Click Device Settings > Port Configuration and then click on the active
target.
2. Associate the active target to the disconnected power port. This will
break the disconnected target's power association.
Finally, associate the active target to the correct power port.
RF Code Energy Monitoring Solution
With the RF Code active RFID hardware and management software and
Raritan's Dominion PX combined, a wire-free energy monitoring solution
that provides a picture of power utilization is offered.
This combined solution does not require any additional IP address
configuration or association. All you need to do is plug an RF Code R170
PDU sensor tag into the SENSOR port of the Dominion PX device.
The RF Code R170 PDU sensor tag collects the power data generated by
Raritan Dominion PX and sends the data to the RF Code Sensor Manager
software, which not only manages the power data but also make
computations about the power usage from the collected data.
You can use the RF Code Sensor Manager to manage the power data
using:

Live table views

Map views

Interactive graphing and reporting

Scheduled graphing and reporting

Alerting and thresholding