Raritan PX-1000 Series, Руководство пользователя

Страница: 320 / 442

Chapter 7: Using the Command Line Interface
305
Role-Bassed Access Control
In addition to firewall access control based on IP addresses, you can
configure other access control rules that are based on both IP addresses
and users' roles.

An IPv4 role-based access control command begins with security
roleBasedAccessControl ipv4 .

An IPv6 role-based access control command begins with security
roleBasedAccessControl ipv6 .
Modifying the Role-Based Access Control Parameters
There are different commands for modifying role-based access control
parameters.

IPv4 commands
To enable or disable the IPv4 role-based access control feature,
use this command syntax:
config:# security roleBasedAccessControl ipv4 enabled <option>
To determine the IPv4 role-based access control policy, use this
command syntax:
config:# security roleBasedAccessControl ipv4 defaultPolicy <policy>

IPv6 commands
To enable or disable the IPv6 role-based access control feature,
use this command syntax:
config:# security roleBasedAccessControl ipv6 enabled <option>
To determine the IPv6 role-based access control policy, use this
command syntax: