Raritan PX-1000 Series, Руководство пользователя

Страница: 37 / 442

Chapter 3: Installation and Configuration
22
See this diagram for the ETHERNET port location on Zero U models.
For 1U/2U models, the ETHERNET port is usually located on the back except
for a few models. This diagram shows the port on the back.
For 2U models, the ETHERNET port is located on the front. This diagram
shows the port on a 2U model.
To make a wireless connection:
Do one of the following:

Plug a 802.11n wireless USB LAN adapter into the USB-A port on
your Dominion PX.

Connect a USB docking station to the USB-A port on the Dominion
PX and plug the 802.11n wireless USB LAN adapter into the
appropriate USB port on the docking station.
Supported Wireless LAN Configuration
If you select the wireless connection, ensure that both of your wireless
USB LAN adapter and wireless network configuration meet the following
requirements.

Network type: 802.11n

Protocol: WPA2 (RSN)

Key management: WPA-PSK

Encryption: CCMP (AES)
Important: Currently only Raritan-provided wireless USB LAN adapters
are supported. You may contact Raritan Technical Support for this
information.