Raritan PX-1000 Series, Руководство пользователя

Страница: 71 / 442

Chapter 4: Using the PDU
56
LEDs for Measurement Units
Five small LED indicators are on the LED display: four measurement units
LEDs and one Sensor LED.
The measurement units vary according to the readings that appear in the
three-digit row. They are:

Amp (A) for current

Volt (V) for voltage

Kilowatt (kW) for active power

Percentage (%) of the unbalanced load
One of the measurement unit LEDs will be lit to indicate the unit for the
value currently shown in the three-digit row.
The Sensor LED is lit only when Dominion PX detects the physical
connection of any environmental sensor.
The five LEDs look similar to this diagram but may slightly vary according
to the model you purchased.
Two-Digit Row
The two-digit row shows the number of the currently selected outlet, line or
circuit breaker. Values that may appear include:

Two-digit numbers: This indicates the selected outlet. For example, 03
indicates outlet 3.

C
x
: This indicates the selected circuit breaker, where
x
is the circuit
breaker number. For example, C1 represents Circuit Breaker 1.

L
x
: This indicates the selected line of a single-inlet PDU, where
x
is
the line number. For example, L2 represents Line 2.
Note: For a single-phase model, L1 current represents the Unit
Current.