Raritan PX-1000 Series, Руководство пользователя

Страница: 65 / 442

50
This chapter explains how to use the Dominion PX device. It describes the
LEDs and ports on the PDU, and explains how to use the LED display
panel. It also explains how the circuit breaker (overcurrent protector)
works and when the beeper sounds.
In This Chapter
Panel Components ..................................................................................50
Circuit Breakers .......................................................................................59
Fuse.........................................................................................................61
Beeper .....................................................................................................64
Panel Components
The Dominion PX comes in Zero U, 1U, and 2U sizes. All types of models
come with the following components on the outer panels.

Power cord

Outlets

Connection ports

LED display

Reset button
Power Cord
Most of Raritan PDUs come with an installed power cord, which is ready to
be plugged into an appropriate receptacle for receiving electricity. Such
devices cannot be rewired by the user.
Connect each Dominion PX device to an appropriately rated branch circuit.
See the label or nameplate affixed to your Dominion PX device for
appropriate input ratings or range of ratings.
There is no power switch on the Dominion PX device. To power cycle the
PDU, unplug it from the branch circuit, wait 10 seconds and then plug it
back in.
Outlets
The total number of outlets varies from model to model.
Chapter 4 Using the PDU