Raritan PX-1000 Series, Руководство пользователя

Страница: 54 / 442

Chapter 3: Installation and Configuration
39
Combining Asset Sensors
Each tag port on the asset sensors corresponds to a rack unit and can be
used to locate the IT devices on a specific rack (or cabinet). For each rack,
you can attach asset sensors up to 64U long, consisting of one MASTER
and multiple SLAVE asset sensors. The difference between the master
and slave asset sensors is that the master asset sensor has an RJ-45
connector while the slave one does not.
The following diagram illustrates some asset sensors. Note that Raritan
provides more types of asset sensors than the diagram.
Number Item
8U MASTER asset sensor with 8 tag ports
8U SLAVE asset sensor with 8 tag ports
5U "ending" SLAVE asset sensor with 5
tag ports
Note: Unlike regular slave asset sensors, which have one DIN connector
respectively on either end, the ending slave asset sensor has one DIN
connector on only one end. An ending asset sensor is installed at the end
of the asset sensor assembly.
To assemble asset sensors:
1. Connect a MASTER asset sensor to an 8U SLAVE asset sensor.

Plug the white male DIN connector of the slave asset sensor into
the white female DIN connector of the master asset sensor.