Raritan PX-1000 Series, Руководство пользователя

Страница: 370 / 442

Chapter 7: Using the Command Line Interface
355
Changing Your Own Password
Every user can change their own password via this command syntax if
they have the Change Own Password privilege. Note that this command
does not begin with
user .
config:# password
After performing this command, the Dominion PX prompts you to enter
both current and new passwords respectively.
Important: After the password is changed successfully, the new password
is effective immediately no matter you type the command "apply" or not to
save the changes.
Example
This procedure changes your own password:
1. Verify that you have entered the configuration mode. See Entering
the Configuration Mode (on page 253).
2. Type the following command and press Enter.
config:# password
3. Type the existing password and press Enter when the following
prompt appears.
Current password:
4. Type the new password and press Enter when the following prompt
appears.
Enter new password:
5. Re-type the new password for confirmation and press Enter when the
following prompt appears.
Re-type new password:
Role Configuration Commands
A role configuration command begins with role .
Creating a Role
This command syntax creates a new role, with a list of
semicolon-separated privileges assigned to the role.