PiXtend V2 -L- Hardware Manual
The metal screws used cut a thread into the aluminum profile during the initial assembly of
the side parts. Therefore, make sure that the screws are carefully tightened and screwed
as straight as possible.
From the other side, on which the side part has not yet been mounted, the locking element
is inserted on the back of the profile (Figure 11). On the back of the profile, there is only
one place where the locking element can be fitted.
www.pixtend.com
Copyright by Qube Solutions GmbH
27 / 146
Figure 10: Mount the side panel
