PiXtend V2 -L- Hardware Manual
2.6. Safety instructions
Read the complete document and the safety and connection notes before you start the
installation of the PiXtend V2 -L-. Save this document even after you have commissioned
all components.
Warning
The company Qube Solutions GmbH does not accept any
liability for damage of any kind resulting from disregarding the
data sheets and operating instructions. The guarantee or
warranty claim and the admission expire.
•
PiXtend may only be operated with the prescribed voltage (12-30 V DC) and a power
supply with VDE and CE mark (for Europe). The power supply must comply with the legal
requirements of the country in which PiXtend is used.
•
The device is only designed for use in dry and clean rooms and is not suitable for outdoor
use or in damp areas.
•
The permissible operating temperature is between 0 °C and 50 °C
1
.
•
PiXtend, the Raspberry Pi as well as all cables, connectors and power supplies must be
kept away from liquids.
•
The PiXtend modules must not be used in the vicinity of flammable liquids, gases or dusts.
•
Only original or recommended spare parts may be used during repairs.
•
Except for the connection strips of the relay, no 230 V, 115 V alternating voltage or any
other hazardous voltage greater than 50 V may be applied at any point. Work on dangerous
voltages is only permitted by trained personnel with the legal authority of the respective
country.
Caution: Danger to life!
•
Neither PiXtend nor the accessories belong in children's hands (under 14 years).
•
In schools, hobby workshops and training facilities, the operation is supervised by trained
personnel.
1
Please refer to the page for further information 65 in this document - chapter:
Technical Data &
Connection Notes
www.pixtend.com
Copyright by Qube Solutions GmbH
13 / 146
