PiXtend V2 -L- Hardware Manual
4. Assembly
In this chapter you will learn how to install the Raspberry Pi computer and the housing
parts. All assembly steps are described in detail in the following, with pictures clarified and
contain important information.
If you have purchased a PiXtend V2 -L- ePLC, you can skip this chapter because the
Raspberry Pi and the housing parts (ePLC Pro) have already been installed at the factory.
Note!
Please observe the assembly and safety instructions, which are
marked with warning signs, in the further course of the assembly
instructions.
Note!
Care must be taken when handling electronic modules such as
PiXtend V2 -L- (without housing parts) and the Raspberry Pi.
Electronic components on the modules can be damaged by
electrostatic discharge.
The components may only be touched at the edges of the circuit boards, on mechanical
screw connections or plug connectors. Avoid direct contact with electronic components
and solder contacts / soldering surfaces.
www.pixtend.com
Copyright by Qube Solutions GmbH
21 / 146
