PiXtend V2 -L- Hardware Manual
7. List of Figures
Figure 1: Scope of delivery: - PiXtend V2 -L- Extension Board (article 620)......................16
Figure 2: Scope of delivery - DIN rail housing (article 712).................................................17
Figure 3: Scope of delivery - Stainless Steel Hood (article 713).........................................18
Figure 4: Scope of delivery - PiXtend V2 -L- ePLC Basic (article 621)...............................19
Figure 5: Scope of delivery - PiXtend V2 -L- ePLC Pro ( article 622).................................20
Figure 6: Connecting the ribbon cable to PiXtend V2 -L-....................................................22
Figure 7: Connect the Raspberry Pi....................................................................................23
Figure 8: Screw the Raspberry Pi onto PiXtend V2 -L-.......................................................24
Figure 9: Insert the earthing claw (before pressing in)........................................................26
Figure 10: Mount the side panel..........................................................................................27
Figure 11: Insert the locking element...................................................................................28
Figure 12: Screw in the locking elements............................................................................29
Figure 13: PiXtend and housing put together......................................................................29
Figure 14: DIN rail housing assembled................................................................................30
Figure 15: DIN rail housing assembled - back.....................................................................30
Figure 16: DIN rail housing - protective earth (PE) connected............................................31
Figure 17: Mount housing on DIN rail..................................................................................32
Figure 18: Assembly of the DIN rail housing completed......................................................32
Figure 19: Raspberry Pi lifted from PiXtend (flat ribbon cable remains connected)...........34
Figure 20: Lower hood part placed......................................................................................35
Figure 21: Raspberry Pi with two spacers screwed.............................................................35
Figure 22: Assemble the lower hood part............................................................................36
Figure 23: Optimum progression of the flat ribbon cable.....................................................37
Figure 24: Safety distance between ribbon cable and hood...............................................37
Figure 25: Install the upper hood - first step........................................................................38
Figure 26: Stainless steel hood ready assembled...............................................................39
Figure 27: Protective conductor connection (PE) at the PiXtend V2 -L- hood....................40
Figure 28: Switch - “SPI_EN”...............................................................................................43
Figure 29: Switch - “PI_5V” in position “ON”........................................................................44
Figure 30: Jumper - analog voltage inputs in 10 V range (factory default).........................45
Figure 31: Jumper - digital inputs in 24 V range (factory default)........................................46
Figure 32: Jumper - Automatic / Manual - RS485...............................................................47
Figure 33: Jumper - RS485 termination...............................................................................48
Figure 34: Jumper - CAN termination..................................................................................48
Figure 35: Jumper - AO / CAN - set to AO...........................................................................49
Figure 36: Software - Win32DiskImager..............................................................................50
Figure 37: Scope of delivery: power supply from our online shop.......................................53
Figure 38: Connect the cables to the adapter......................................................................54
Figure 39: Supply terminal on PiXtend V2 -L-.....................................................................55
Figure 40: Connection of the power supply on PiXtend V2 -L-...........................................56
www.pixtend.com
Copyright by Qube Solutions GmbH
143 / 146
