Pitney Bowes Relay 5000 Скачать руководство пользователя страница 79

Страница: 79 / 202

SV63136 Rev. A

3-35

Basic Operation • 3

Sheet Options

(continued)

Menu Item

Associated Options and Actions

Additional Settings

Double Detect

allows the system to sense when multiple sheets

are fed unintentionally.

NOTE:

This menu option is not available when the job requires a

Custom Feeder.
•

Double Detect Feature

allows you to toggle:

Off

means this feature will not function for this item, or

means this feature is active.

•

Location

allows you to toggle:

Default

, or

Custom

•

Custom Location for Top Edge

allows you to enter a specific

measurement (the distance from the edge feeding first into the

feeder) where the system should attempt to detect a double.

NOTE:

Set this option when Location is set to "Custom". The

double detect region cannot be within 1-inch (25mm) of the

lead or trail edges of the sheet.
-

Use the UP/DOWN arrow keys to adjust the measurement

(in millimeters).

Select "Accept" when you are done.

•

Action On Double

allows you to select where the items should

be fed to if a double is detected.

Feeder Type

allows you to change the Feeder setting when

material is problematic, or to indicate that the job requires a Custom

Feeder.

NOTE:

This menu option is not available when the job requires an

Attached Printer.
•

Normal

is used for most items.

•

Manual Feed

is used when items will be fed into the system

by hand. Refer to

Manual Feeder

Chapter 2

for more

information.

•

Custom Feeder

is used when items will be fed into the system

by the Custom Feeder.

Feeder Linking

allows multiple Feeders to feed the same material.

NOTE:

This menu option is not available when the job requires a

Custom Feeder

an Attached Printer.

•

None

means there is no linking of Feeder Trays.

•

Two Feeders

indicates that two Feeder Trays are linked and

feeding the same material.

NOTE:

Scanned sheets can be linked vertically in both the High

Capacity Sheet Feeder and the Feeder Tower.

Scan Items

allows you to indicate whether or not an item should be

scanned.
Toggle:
•

Yes means this feature is active, or

•

means this feature will not function for the item.

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 79 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: