manualshive.com logo in svg

Pitney Bowes Relay 5000, Руководство оператора, Страница: 53 / 202

Поделиться
Скачать
Pitney Bowes Relay 5000 Скачать руководство пользователя страница 53

SV63136 Rev. A  

3-9

Basic Operation • 3 

Tray Information 

The Mail Piece Icon Tree in the Home screen provides information about 

each item in the mailing. Each icon represents a document in the current 

job. Use the arrow keys to highlight any document icon. When an icon is 

highlighted, any or all of the following information will display:
•  Graphic of the document/media type.
•  Tray type into which the document/media should be loaded.
•  Orientation of the document in the tray.

It is important to loosen (fan) any items in the stack that may be stuck 

together BEFORE you place the material in the tray. To do this:
1.  Hold one end of the stack in one hand.
2.  Flip through the opposite end of the stack with your other hand.
3.  Repeat this with the other end of the stack.

Loading Material 

into the Trays

Figure 3.2:  Loosen (Fan) Material

Содержание Relay 5000











































































































































































































Отзывы:

Нет отзывов