Pitney Bowes Relay 5000 Скачать руководство пользователя страница 74

Страница: 74 / 202

3-30

SV63136 Rev. A

3 • Basic Operation

Creating a Job

(continued)

Menu Options

Associated Options/Actions

Job Comments

Use the alphanumeric matrix to enter any additional information

related to the job. If the job will be saved by a supervisor or

manager, you can make it easy for operators to identify/select the

correct job in the future by entering a job description in the job

comments area.

NOTE

Job comments can contain up to 120 characters.

Batch Mode

Toggle:
•

Off

means this feature will not function for this job, or

•

means this feature is active.

NOTE

Batch mode cannot be used with scanning jobs.

Batch Count

Use the numeric matrix to enter the batch count value.

NOTE

The batch count can contain up to four digits. The

minimum is "5" and the maximum is "9999".

Set Over Max Count

Indicates what will happen to sets that exceed the set over count

quantity. Choices include

Divert

and

Stop

Use Postage Meter

Select this option if you will be using the Mail Machine Interface

(MMI). This interface enables communication between the Inserting

System and a mailing system via a USB connection.
The system sends start and stop signals to the mailing system, and

the mailing system can send error messages back to the inserter to

stop feeding.
Toggle:
•

Off

means this feature will not function for this job, or

•

means this feature is active.

NOTE

The MMI is a purchasable exit option. Only letter-sized

envelopes can be used with this interface.
Refer to

“ MMI”

Chapter 7

for more information about

the MMI.

Advanced

Allows access to advanced job settings.

IMPORTANT

Do not

change the advanced job settings unless

instructed to do so. Changing settings may affect inserter

performance.

Mark Piece Count

Select this option if you have a Flats Sealer and want to use

the envelope edge marker to mark every nth envelope. Use the

numeric matrix to enter the appropriate value.

NOTE

: The Flats Sealer is a purchasable exit option. Only

letter-sized envelopes can be marked using the envelope

edge marker. Refer to Chapter 7 for more information about

the Flats Sealer.

8. Select

Accept

when done.

9. The Create - Saved Created Job screen displays.

• Select

Yes, Save

to save the job (optional). You must have

supervisor or manager access rights to save jobs.

• Select

No, Save Later

if you do not have supervisor or manager

access rights.

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 74 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: