Pitney Bowes Relay 5000 Скачать руководство пользователя страница 186

Страница: 186 / 202

8-40

SV63136 Rev. A

8 • Scanning

1. When requested by the machine, measure and enter the distance (A)

from the top edge of the sheet to the point after the printed matter where

you wish the machine to START scanning.

2. When requested by the machine, measure and enter the distance (B)

from the start point just set, to the point you wish the inserter to STOP

scanning. This is called the Clear Zone.

NOTES:

• Setting the Clear Zone closer to the beginning and end of the OMR marks de-

creases the possibility of any poor print or imperfections on the material being

interpreted as marks.

• Conversely, setting the Clear Zone too close to the beginning and end of the

marks could cause problems if the position (registration) of the printing on the

material varies.

• A good guide is to limit the Clear Zone, but always allow at least 3/8" (9 mm)

before and after the marks.

Grey area indicates

printed matter on

material

TOP OF SHEET

Defining the

Clear Zone

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 186 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: