Pitney Bowes Relay 5000 Скачать руководство пользователя страница 195

Страница: 195 / 202

SV63136 Rev. A

A-3

Glossary • A

Material References

Additional Sheet -

Additional sheet(s) can be added to the Mail Piece.

Each will be placed into the envelope behind the Control Document.

Control Document -

This sheet normally contains the destination address.

This sheet will be positioned closest to the envelope window, or to the front

face of a windowless envelope.
Relates to:
• OMR and Barcode use, and
• Addressed piece on non-OMR jobs.

Fan -

The process of flicking through a stack of material to separate the

items prior to loading.

Feeder -

Object that material is loaded into to be pulled into the folder/in-

serter for processing.

Fold Types -

The folder offers these options:

•

C Fold

Also known as "standard" fold.

•

Z Fold -

Also known as "accordion" fold.

•

Single Fold

One fold applied (usually folded in half).

•

Double Fold

Folded in half and then in half again.

•

No Fold

No fold present.

Insert -

An item that doesn't require folding before being placed into an en-

velope. There are five kinds of inserts:
•

Reply Envelope

An envelope placed into the Outer Envelope with the

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 195 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: