Pitney Bowes Relay 5000 Скачать руководство пользователя страница 146

Страница: 146 / 202

7-14

SV63136 Rev. A

7 • Add-On Modules

Belt Stacker - Letter

Flats Mail

The Horizontal Belt Stacker can be used in Right Angled or In Line configu-

ration with the

Relay

inserters.

There are two setups for In Line operation: One for letters (e.g. #10 / DL/C5)

sized envelopes, and another for ‘flats’ (e.g. #9 / C4) sized envelopes. In

Line mode is essential for running flats.

Tandem Belt Stacker - Letter

and

Flats Mail

A particular configuration of the stacker is available for the

Relay

inserters

that allows automatic stacking of ‘Letters’ and ‘Flats’ simultaneously. The

stacker consists of two stacker units mounted onto one set of legs or one

table at the correct vertical spacing to receive ‘Letter’ and ‘Flats’ output from

the Inserter.
Refer to the

Horizontal Belt Stacker Operator Guide (SV40231)

for detailed

information about the belt stacker and the tandem belt stacker.

Horizontal Belt

Stacker

Vertical Power

Stacker

The Vertical Power Stacker is a compact, powered, bottom-feed stacker

that connects to the output of several Pitney Bowes Document Inserting

Systems, including the

Relay

inserters. It neatly stacks the mail pieces fed

from the inserter and keeps them in the same order as they were originally

loaded. Sensors in the stacker monitor the mail pieces fed into it; if a mail

piece should stall or the stacker fills up, the inserter stops automatically.
The stacker is designed for continuous unloading during mail runs to

maintain best productivity. Unloading "on-the-fly" keeps your mail run going

and helps avoid unnecessary interruptions.
Refer to the

Vertical Power Stacker Operator Guide (SV61322)

for detailed

information about the vertical power stacker.

Exit Transport

The Exit Transport assembly extends the path of the letter envelope exit

beyond the distance needed for flats stacking below. The Exit Transport

connects to the inserter and can be mounted to other output devices while

maintaining flats envelope functionality.
The Exit Transport also provides optimum operator access to the High

Capacity Envelope Feeder (HCEF) in certain configurations.

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 146 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: