Pitney Bowes Relay 5000 Скачать руководство пользователя страница 29

Страница: 29 / 202

SV63136 Rev. A

2-11

Meet the Inserting System • 2

The control panel consists of the following components:

• Screen Option Keys

allow you to define settings for up to 24 jobs that

you can store in the system’s memory. These keys also provide the

means to edit any of the stored jobs.

•

Fixed Function Keys

allow you to access the system’s built-in tools that

appear on the screen (such as the system’s help file).

•

Screen Navigation Keys

allow you to move UP/DOWN and right/left in

the Display and to apply selections that you’ve made.

• Machine Action Keys

control hardware components and mechanical

movements.

•

LED Status Indicator

About the

Control Panel

The screen option keys are the eight keys on the right side of the screen.

These keys correspond to options on the screen, and therefore have no

dedicated labels. Use these keys to highlight an item in a displayed pick list

and/or to select the associated menu, item, action, or option.

Screen Option

Keys

Reset

Counter

Help

Cancel

Home

Start

Trial

Piece

Clear

Deck

Stop

Control Panel

Screen Navigation Keys

Machine Action Keys

Screen Option Keys

LED Status Indicator

Fixed Function Keys

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 29 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: