Pitney Bowes Relay 5000 Скачать руководство пользователя страница 129

Страница: 129 / 202

SV63136 Rev. A

6-11

Specifications • 6

Sheets

Sheets refer to material that must be folded before being inserted into

standard letter envelopes. In the special case of flats, sheets are not folded.

A group of sheets is referred to as a collation.

Material Substrates

Acceptable paper types include new or recycled bond, text, laser and offset.

Offset coatings including matte, dull or gloss.

NOTE: Use of glossy material may degrade system performance.

Grain

Material may be short or long grain.

Printing

Printing may be simplex or duplex with no restriction on color.

Coating

Varnish applied to sheets to modify finish is allowed.

Laser-Printed Material

Freshly laser-printed material which meets the curl requirements is

acceptable.

Feeder Tower - Sheet Specifications

Parameter

Minimum Value

Maximum Value

Width

5 inches (127 mm)

9.84 inches (250 mm)

Length

5.31 inches (135 mm)

14 inches (356 mm)

Thickness

0.003 inches (0.076 mm)

0.012 inches (0.305 mm)

Paper Weight

16 lb. (60 gsm)

44 lb. (175 gsm)

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 129 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: