Pitney Bowes Relay 5000 Скачать руководство пользователя страница 128

Страница: 128 / 202

6-10

SV63136 Rev. A

6 • Specifications

Inserts are defined as material that does not require folding (may be pre-

folded) before insertion into letter-sized envelopes. This definition includes

individual sheets, collations of unfastened sheets, C folded or single folded

inserts or pre-made, bound booklets (no fastener exposed that might

damage rollers).
Additionally, "insert" also refers to a single reply envelope (BRE) when

inserted into a flat-sized envelope.

Material Substrates

Acceptable paper types include new or recycled bond, text, laser and offset.

Offset coatings include matte, dull or gloss.

NOTE: Use of glossy material may degrade system performance.

Grain

Material may be short or long grain.

Printing

Printing may be simplex (one side) or duplex (both sides) with no restriction

on color.

Coating

Varnish applied to sheets to modify finish is allowed.

Feeder Tower - Insert Specifications

Parameter

Minimum Value

Maximum Value

Width

5 inches (127 mm)

9.84 inches (250 mm)

Length

2.83 inches (72 mm)

6 inches (153 mm)

Thickness

0.003 inches (.076 mm)

0.1 inches (2.54 mm)

Paper Weight

16 lb. (60 gsm)

44 lb. (175 gsm)

Inserts

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 128 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: