Pitney Bowes Relay 5000 Скачать руководство пользователя страница 35

Страница: 35 / 202

SV63136 Rev. A

2-17

Meet the Inserting System • 2

Status Area

(continued)

• If any sheet feeder(s) are programmed to feed multiple sheets, a

modified icon indicating multiple sheets will appear together with a

number showing the number of sheets in the set.

• On a scanning (OMR or Barcode) job, a variable number of sheets might

be fed under control of the OMR or Barcode marks and so a small letter

"n" will appear in place of the number.

Number of sheets in set

• Lines between the icons indicate the way the mailpiece is assembled.

The outer envelope is at the top of the icon tree.

• Making any change to the job settings can cause the feeder tray

assignments to change in the Mail Piece Icon Tree.

NOTE:

Any time the job set up changes, be sure to check the Mail Piece Icon

Tree for changes in the feeder tray assignments.

Indicates variable number of sheets in set (scanning jobs only)

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 35 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: