Pitney Bowes Relay 5000 Скачать руководство пользователя страница 36

Страница: 36 / 202

2-18

SV63136 Rev. A

2 • Meet the Inserting System

Mail Piece Icon Tree Example

Each icon displays important information about the mail piece component

that it represents. The following explains information conveyed by the icon

and how it assists you in loading and running a job.

Status Area

(continued)

NOTES:

• In the example above, the Top Address, Additional Sheet and C Fold icons

represent a set. That is, the Top Address and Additional Sheets are accumu-

lated together, and the C Fold is applied to them.

• An Insert

(see the Reply Envelope icon)

always appears as a single set within

the Mail Piece Icon Tree.

Example: Mail Piece Icon Tree

Window Envelope loaded flap down, flap

last. Envelope sealing turned on, loaded

into Feeder G.

C Fold selected.

Top address loaded Face Up, fed Top First,

loaded into Feeder C. Double Detect is on.

Additional Sheet - (No address) loaded Face

Up, fed Top First loaded into Feeders B

and D; Feeders B and D are linked. (Linked

Trays will always be on the same side of the

Tower.) Double Detect is on.

Reply Envelope loaded Flap Side Down, fed

Flap First, loaded into Feeder A.

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 36 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: