Pitney Bowes Relay 5000 Скачать руководство пользователя страница 142

Страница: 142 / 202

7-10

SV63136 Rev. A

7 • Add-On Modules

Mail stream integrity is the ability to ensure our clients deliver envelopes to

their customers with only the intended enclosures.
The Relay system with file based processing software is a solution that pro-

cesses mail with a high degree of mail run and mailpiece integrity. The file

based software works with the Relay inserter to ensure that every mailpiece

is completed with the correct contents.
This software provides centralized control that allows the file based software

PC to control operational areas on the inserter. The software can detect

inserter problems. When material jams or inserter problems occur, the soft-

ware pinpoints them swiftly to minimize machine downtime.
The solution uses bar coded documents that enable a dedicated computer

to keep track of the piece during the process and tell the inserter how to

build each mailpiece to the specified completion. This is known as file based

processing, which provides mail piece integrity to the mail operation. This

solution uses Planet Press, a software suite with powerful document cre-

ation and work flow management capabilities, to produce the documents

that are processed by the inserter and file based software.

File Based

Processing

The exit portion of the system accepts a variety of options. The Letter Drop

Stacker and the Flats Drop Stacker are standard options for all systems.

Exit Options

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 142 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: