Pitney Bowes Relay 5000, Руководство оператора, Страница: 13 / 202

SV63136 Rev. A 1-3
Introduction • 1
Relay™ 5000/6000/7000/8000 are high throughput, mail creation systems
designed to handle a broad range of applications with minimum operator
setup adjustments. These systems have the ability to feed, fold, and insert
mail piece components into an outer envelope. The systems generate letters
or flats as the final mail piece. The systems also accept a variety of options
that provide a wide range of capacities and operating speeds.
System Features
• The inserter can fold up to a maximum of 10 sheets of 20 lb. (80 gsm)
with a single fold, subject to test.
• The inserter supports multiple inserts into flat envelopes.
• The inserter supports marking of every nth envelope if the flats sealer is
present on the system.
• The systems can be configured with four flexible feeder trays, that come
in two types:
- Sheet trays - capable of feeding sheets
- Insert trays - capable of feeding slip/insert materials, pre-folded
inserts, thin booklets, and envelopes.
• The Relay 7000/8000 system is equipped with a dedicated High
Capacity Envelope Feeder (HCEF) that allows for greater speed and
throughput. The systems also accept material from optional upstream
input devices.
System Components
The systems are configured with two major components:
• Feeder Tower
• Transport Deck
The feeder tower sends material from the feeder trays to the transport deck.
Depending on the job parameters, the material may or may not need to
pass through the folder into the transport Deck. If it does, the system offers
numerous types of folds and the ability to insert the folded material into the
appropriate position in the mail piece collation.
The system can also seal the envelope (letter only) before sending the final
mail piece to a stacking unit.
About Your
System
It is important to be familiar with this guide as it will enable you to utilize the
system to its full potential, while keeping problems to a minimum.
NOTE: The availability of add-ons and options for your inserting system
varies by region. Refer to your system supplier for availability details.
A Note to the
Operator