Pitney Bowes Relay 5000, Руководство оператора, Страница: 166 / 202

8-20 SV63136 Rev. A
8 • Scanning
Editing a
BCR Scan
Configuration
To edit a BCR Scan Configuration:
1. From the Home screen, select
Menu>Tools .
2. Select Configure System>Scan Configuration Setup .
NOTE: If you are not logged in with supervisor or manager access rights, you
will be prompted to enter an access code.
3. Select the appropriate scan type.
4. The Scan Configurations for the selected scan type display. Use the UP/
DOWN arrow keys to select the scan configuration you want to edit.
5. Select Edit Highlighted Item .
6. The screen displays the scan grid with the available BCR functions for
the selected Scan Configuration. You can:
Menu Option Associated Options/Actions
Increase Allows you to increase the selected character, bit or size for
a function.
a. Use the UP/DOWN and LEFT/RIGHT arrow keys to
highlight the character (C), bit (B) or size (S) within the
grid.
b. Press Increase to edit the info for the highlighted item.
Decrease Allows you to decrease the selected character, bit or size for
a function.
a. Use the UP/DOWN and LEFT/RIGHT arrow keys to
highlight the character (C), bit (B) or size (S) within the
grid.
b. Press Decrease to edit the information for the
highlighted item.
Set Options Allows you to edit the options for the selected mark. Refer
to the Set Options table in the Setting Up a BCR Scan
Configuration section of this chapter for more information
Scan Mark Allows you to toggle the appropriate mark orientation:
•
Ladder, or
• Picket.
PC Control Allows you to toggle whether or not the PC Control is used:
•
Yes, or
• No.
7. Select Finished when you are done.