manualshive.com logo in svg

Pitney Bowes Relay 5000, Руководство оператора, Страница: 125 / 202

Поделиться
Скачать
Pitney Bowes Relay 5000 Скачать руководство пользователя страница 125

SV63136 Rev. A  

6-7

Specifications • 6

Feeder Tower 

and Base 

Material 

Specifications

Any material fed for letter-size mail pieces shall be capable of being 

transported through a 1.5 inch (38 mm) radius, 1/4 turn without permanent 

deformation, breaking of perforations, or any other damage to the piece. 
Color Restriction: none for pre-printed materials.
Minimum Paper Opacity: 5% less than 16 lb bond (60 gsm) copy paper.
Maximum Paper Opacity (when double detection is required) is 5% 

greater than 24 lb. bond (90 gsm) copy paper with normal 10 point printing 

throughout the page.

NOTE:  Any substance added to improve material handling (such as powder) shall 

not fall off in visible quantities when the sheet is tapped on the edge of a hard 

surface.

Envelope Construction and Material

•  Envelopes shall be standard side seam, diagonal side seam, center 

seam, or executive. They can be die or web cut, with or without patched 

windows. 

NOTE:

  Unpatched (open) window outer envelopes are not permitted. 

•  Window patches shall be flat, ripple free and made of glassine or 

polystyrene material. Patches shall be glued within 0.06 inch (1.6 mm) 

from the top edge of the patch material to the window cutout.

•  Envelope materials shall include new or recycled white wove, manila, 

and lithographic material. Non-woven or synthetic envelopes (e.g., 

Tyvek

®

) or envelopes with external fasteners are not permitted.

•  Envelopes with re-moistenable flap adhesives made of starch (dextrin), 

resin (tropical formulation) or combination of the two may be used.

•  uter envelope using self-seal, peel and stick, or pressure seal flaps are 

not permitted. 

•  The distance between the glue line and the bottom flap edge of the 

envelope shall not exceed 0.08 inch (2 mm).

Envelope Size for Insertion

•  Envelopes shall be at least 0.5 inch (13 mm) wider than the sum of the 

maximum width of the insert pack plus the thickness of the pack.

•  Envelopes shall be at least 1/4 inch (6 mm) deeper than material to be 

inserted.

•  No more than three letter-sized sheets can be inserted into a #9 (C5)

envelope when the aligner is in use. 

Outer Envelopes

For reliable operation, all materials must conform to published 

specifications. Feed problems and high stall rates are often due to use of 

substandard materials.

General 

Information

Содержание Relay 5000











































































































































































































Отзывы:

Нет отзывов