Pitney Bowes Relay 5000 Скачать руководство пользователя страница 168

Страница: 168 / 202

8-22

SV63136 Rev. A

8 • Scanning

Reviewing

a Scan

Configuration

If necessary, you can view a list of marks associated with the Scan Configu-

ration without entering the Edit mode.

NOTE: This option is only available if the PC Control is set to

1. From the Home screen, select

Menu>Tools

2. Select

Configure System>Scan Configuration Setup

NOTE:

If you are not logged in with supervisor or manager access rights, you

will be prompted to enter an access code.

3. Select the appropriate scan type.
4. The scan configurations for the selected scan type display. Use the UP/

DOWN arrow keys to select the scan configuration you want to review.

5. Select

Review Highlighted Item

6. The Review Scan Code screen displays. The marks associated with the

configuration appear in the Functions list. Use the UP/DOWN arrow keys

to select the function you want to review.

7. Select

Finished

once you have reviewed the list.

Viewing the Job

List

View the jobs associated with the selected scan configuration.

NOTE: This option is not available if there are no jobs associated with the se-

lected Scan Configuration.

1. From the Home screen, select

Menu>Tools

2. Select

Configure System>Scan Configuration Setup

NOTE:

If you are not logged in with supervisor or manager access rights, you

will be prompted to enter an access code.

3. Select the appropriate scan type.
4. The scan configurations for the selected scan type display. Use the UP/

DOWN arrow keys to select the scan configuration with the job list you

want to view.

5. Select

View Job List for Highlighted Item

6. The View Job List screen displays. Use the UP/DOWN arrow key to

scroll through the job list.

7. Select

Cancel

to return to the Scan Configuration screen.

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 168 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: