Pitney Bowes Relay 5000 Скачать руководство пользователя страница 174

Страница: 174 / 202

8-28

SV63136 Rev. A

8 • Scanning

Adjusting the

Scan Heads

for Picket

Orientation

Marks

To adjust the scan heads:
1. Fold one of the sheets to be scanned

in half vertically (side with mark facing

up.)

2. Draw two arrows, one at the top of the

mark, and one at the bottom of the

mark, pointing towards the top of the

sheet.

Vertical

fold

3. Fold the sheet horizontally, so the bar-

code appears on either side of the fold

line.

4. Open the Main Transport Deck Cover.

Use the ruler to measure the distance

from the center of the sheet (lined up

at 0 on the ruler) to the center of the

marks.

5. Refer to the loading instructions to

determine:
• The scan head location to be used

for this sheet (left or right)

• If the sheet will be loaded top or

bottom first.

6. Open the HCSF Tower cover.

TIPS:

• Remove the left feeder Trays from the feeder tower to allow the HCSF

tower cover to open freely.

•

If you have two HCSFs on your system, the first HCSF Tower will

prevent the second tower (farthest) from opening fully. For best

results, be sure you have proper lighting when adjusting the scan

head in the second tower.

Horizontal

fold

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 174 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: