Pitney Bowes Relay 5000 Скачать руководство пользователя страница 165

Страница: 165 / 202

SV63136 Rev. A

8-19

Scanning • 8

Editing a Scan

Configuration

Editing an OMR Scan Configuration

To edit an OMR Scan Configuration:
1. From the Home screen, select

Menu>Tools

2. Select

Configure System>Scan Configuration Setup

NOTE: If you are not logged in with supervisor or manager access rights, you

will be prompted to enter an access code.

3. Select the appropriate scan type.
4. The Scan Configurations for the selected scan type display. Use the UP/

DOWN arrow keys to select the Scan Configuration you want to edit.

5. Select

Edit Highlighted Item

6. The screen displays the functions list for the selected Scan

Configuration. You can:

Menu Option

Associated Options/Actions

Add Item

Allows you to add a mark to the selected Scan Configuration.
a. Highlight the appropriate item in the Available list, then

select "Add Highlighted Item". The item you selected in the

Available list will move to the end of the Selected list.

b. Repeat step a, above, until all necessary items have been

added to the Selected list.

c. Press "Accept" when you are done.
Once you have added the mark, be sure to set the appropriate

options. Refer to the

Set Options

table in the

Setting Up a OMR

Scan Configuration

section of this chapter for more information

NOTES:

•

Items that can be added appear in the

Available

list. Items

that have been added appear in the

Selected

list.

•

Use the LEFT/RIGHT arrow keys to move between lists.

Use the UP/DOWN arrow keys to move within a list

Delete Highlighted

Item

Allows you to delete a mark within the selected Scan

Configuration:
a. Use the UP/DOWN arrow keys to select the appropriate

mark within the function list.

b. Select "Delete Highlighted Item".
c. Select "Yes, Delete Item".

Move Highlighted

Item Up

Allows you to move the selected mark up within the function list.

Move Highlighted

Item Down

Allows you to move the selected mark down within the function

list

Set Options

Allows you to edit the options for the selected mark. Refer to the

Set Options

table in the

Setting Up a OMR Scan Configuration

section of this chapter for more information

7. Select

Finished

when you are done.

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 165 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: