Pitney Bowes Relay 5000, Руководство оператора, Страница: 22 / 202

2-4 SV63136 Rev. A
2 • Meet the Inserting System
System
Components
(continued)
3
Manual Feeder - allows you to manually feed stapled or unstapled
sets of up to 5 sheets of 20 lb (80gsm) paper. The machine waits
for each set to be manually fed before folding and inserting the
set automatically into the envelope. The Manual Feed option is
available during job creation. Inserts and/or Sheets from other Trays
can also be added to the job.
4
Pre-fold Accumulator - is a staging area for the material that
needs to be collated together and then sent to the Folder unit.
5
Folder - applies one of the available fold types to Sheets.
6
Post-fold Accumulator - is a staging area for the folded Sheets to
meet any inserts that are to be included.
7
Insertion Area - is the part of the transport where the collation
intended for a single addressee is inserted into an outer envelope.
8
Moistener, Closer, Sealer - Brushes sweep across the envelope
flap to wet the glued area of the flap. The letter-size envelope then
moves through the Closer and Sealer areas of the unit to complete
the mail piece.
9
Sealing Solution Bottle - is located inside an opening cover at the
front right side of the machine. It provides sealing solution to the
envelope sealing system.
10
Control Panel - allows you to run the machine and configure job
settings. It also displays the machine status and shows loading
instructions and details of the job. See the following pages for more
information on the controls and screen.
11
High Capacity Envelope Feeder (Relay 7000/8000 only) - holds
at least 500 letter-sized envelopes. It feeds directly to the Insertion
Area.
Drop Stacker (available on all units, not shown) or Power Stacker
(optional, not shown ) - collects and neatly stacks the finished mail pieces
that exit the system. The drop stacker can be unlatched from the system
when it is not needed. The power stacker is mounted to the system.