Pitney Bowes Relay 5000 Скачать руководство пользователя страница 155

Страница: 155 / 202

SV63136 Rev. A

8-9

Scanning • 8

Scanning

Features

Dynamic Envelope Selection

Dynamic envelope selection allows you to create scanning jobs on Relay

7000/8000 systems (with or without a High Capacity Sheet Feeder) that will

insert mail piece contents into either letter-sized or flat envelopes.
Letter-sized envelopes are loaded at the High Capacity Envelope Feeder.

Flat envelopes are loaded at the Feeder Tower, and can be linked so that

they feed from Feeder A and Feeder C.

NOTE: You cannot use a windowed flat envelope with Top Address, Z folded jobs.

Dynamic envelope selection cannot be used when the stiff media insert is selec

This feature is implemented in one of two ways:
• Using the Envelope Select (ES) scan mark. The Envelope Select scan

mark is available on systems that have BCR scanning or the Selective

Operations level of OMR scanning enabled. Refer to

BCR and OMR

Mark Levels

in this chapter for more information about the various levels

of scanning.

• Setting the “Item Overcount Action” to “Use Alternate Envelope”. Refer

Creating a Job

Chapter 3

Assigning a Scan Configuration to an

Existing Job

in this chapter for more information.

Jobs using dynamic envelope selection must be set up with two outer

envelopes. The first set in the job must contain the information necessary to

make the envelope selection (either the Envelope Select scan mark or “Item

Overcount Action” setting). Secondary sets of scanned material, generic

(non-scanned) material, or sets containing select fed sheets can be included

in a dynamic envelope selection job.
Additionally, a single Reply Envelope (BRE) can be included in the job. If

you wish to add an insert type other than a BRE to the flat envelope, the

insert must be called a BRE in the Mail Piece Icon Tree.

NOTE: Thick inserts (such as booklets) may have trouble accumulating in the

Pre-fold Accumulator and are not recommended for use.

The BRE/insert will accumulate with the flat set in the Pre-fold Accumulator

prior to insertion into the envelope.
Currently, dynamic envelope selection cannot function with the Batch mode,

or with any of the divert functionality.

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 155 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: