Pitney Bowes Relay 5000, Руководство оператора, Страница: 192 / 202

8-46 SV63136 Rev. A
8 • Scanning
The Selective Operations level of scanning contains marks that provide
special feeding instructions.
Mark Purpose
DVS - Divert Sheets When present, this mark indicates that the accumulation in
the pre-fold accumulator should be diverted into the divert
bin without folding or completing assembly.
ES - Envelope Select When present, this mark indicates that dynamic envelope
selection should occur.
SL - Seal This mark indicates the system should seal a Mail Piece. It
does not effect where the Mail Piece exits the system.
Seal marks can be either present or absent.
•
If Seal is set to present , and the Seal mark is on an
item, then the Mail Piece will be sealed. An item that
doesn't have the Seal mark will not be sealed.
• If Seal is set to absent , and the Seal mark is on an
item, the Mail Piece will not be sealed. An item that
doesn't have the Seal mark will be sealed.
TIP
:
This mark is useful when materials need to be hand-
stuffed into an envelope.
SF(n) - Select Feed These marks instruct the machine to select material from
specific feeders. Up to nine Select Feed marks can be
within the code.
Only one item in a job can contain select feed information;
this item must be the first item scanned in the job.
All sheets or inserts for a single collation must be marked
with the same select feed pattern.
Select Feed marks can be either present or absent.
SN(n) - Select Next This mark functions similar to Select Feed, but applies
to the next Mail Piece in the job. This is provided for
compatibility with older SECAP
™
inserters.
Select Next marks can be either present or absent.
Selective
Operations Level