Pitney Bowes Relay 5000 Скачать руководство пользователя страница 56

Страница: 56 / 202

3-12

SV63136 Rev. A

3 • Basic Operation

Loading Insert Trays

NOTE:

To view a demo of the Insert Tray loading and side guide adjustment

processes: go to the Home screen and select “Loading Instructions and Pre-Run

Adjustments”. Use the UP/DOWN arrow keys to select an Insert in the Mail Piece

Icon Tree, then select “Feeders Setup Demo”.

To load material into an insert tray:
1. Use the sled locking lever to slide the sled to the end of the tray. The

sled will automatically lock in place.

2. Using the side guide adjustor, open the sides of the tray beyond the

width of the material.

3. Stand a stack of material straight up and against the front end of the

tray, and in the orientation specified on the Mail Piece Icon Tree and

Home screen loading instructions.

4. Using the side guide adjustor, bring the sides of the Tray

lightly

against

the material, then release the adjustor. The guides will automatically

spring back to a position that will allow for proper clearance during

feeding of the material in the tray.

NOTE:

Side Guides only spring back after they are moved inward.

For more information on side guide adjustments, see

Adjusting Tray Side

Guides

in this chapter.

Figure 3.4.1: Stand the Inserts

Loading Material

into the Trays

(continued)

Содержание Relay 5000










































































































































































































Результаты поиска

Содержание Relay 5000

Отзывы:

Pitney Bowes Relay 5000, Руководство оператора, Страница: 56 / 202

Результаты поиска

Содержание Relay 5000

Отзывы: