ONTRAK Synergy Integra, Руководство по эксплуатации, Страница: 248 / 350

10-10 INTEGRA Operations Revision A 7/26/00
20-0200-231 (CR), 20-0200-232 (Std), 20-0200-251 (CD)
3 “Press EDIT to change configuration.” This message signifies
that the alarm has configurable parameters.
4 “Press SAVE or UNDO after changes are complete.” Instructs
the user to save or undo configuration changes.
Choosing an Alarm for Configuration
The Alarm List window has a scroll bar on its right side (see
following illustration). Touch the scroll bar’s UP and DOWN arrows
or touch and “drag” the Slider Button or Bar to display a specific
alarm. Touch the alarm to select it. When selected:
alarm highlights (blue),
Alarm Number and Description display in the boxes at the top of
the screen,
alarm displays if it is selectable or configurable,
and if configurable, displays the alarm’s current configuration.
ALARM CONFIGURATION MENU: Choosing Alarms
Configuring the Alarm
There are three major sections to the
ALARM CONFIGURATION
window (see following illustration). Two of the sections are used to set
various parameters of the alarms. The third is used to display the
Alarm Description. The three sections explained below are: Response,
Alarm Description, and Set Configuration.
100 BRUSH STATION 2 ROLLER MOTOR SPEED STANDARD 200 MM
Touch the
Alarm to
select it.
Touch Up and Down Arrows to
scroll through the Alarms.
Touch and “drag” Slider Button
to quickly display an Alarm.