ONTRAK Synergy Integra, Руководство по эксплуатации, Страница: 168 / 350

9-8 INTEGRA Operations Revision A 7/26/00
20-0200-231 (CR), 20-0200-232 (Std), 20-0200-251 (CD)
Change EVENT TIME
3 Touch TIME in the appropriate EVENT column to display the
NUMBER PAD screen.
First complete the TIME operation for EVENT 1. If additional
EVENTs are used, complete them in consecutive order; EVENT 1,
EVENT 2, and EVENT 3.
If any of the EVENT, TIME entries are
set to “ 0 ” the following EVENT entries will not be operational.
Thus, if EVENT 2 TIME is set to “ 0 ” and EVENT 3 TIME is set to
30 seconds (300 -
10
th
of seconds)
, EVENT 3 will never be triggered.
4 Enter the desired process time (
10
th
of
seconds ) for each EVENT on
the
NUMBER PAD,
and then touch ENTER
to accept the value and
exit the
NUMBER PAD
screen.
The TIME displays on the screen in
seconds .
Remember, the Brush Station’s total process time is
determined by adding together the time in
EVENT 1, EVENT 2,
and EVENT 3 TIME
boxes.
OR OR
TIME buttons
for the three
EVENTS.
STANDARD