Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 98 / 1488

neighbor prefix-tree
Syntax
neighbor { ipAddress | ipv6Address | peerGroupName }
prefix-tree prefixTreeName { in | out }
no neighbor { ipAddress | ipv6Address | peerGroupName }
prefix-tree [ prefixTreeName ] { in | out }
Release Information
Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
Description
Assigns an inbound or outbound prefix tree. The no version removes the prefix tree.
Options
■
ipAddress —IP address of BGP neighbor
■
ipv6Address —IPv6 address of BGP neighbor; valid only under the IPv4 address
family for advertising IPv4 routes over BGP IPv6 peers
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
■
prefixTreeName —Name of a BGP prefix tree
■
in—Assigns prefix tree to incoming routes (inbound policy)
■
out—Assigns prefix tree to outgoing routes (outbound policy); you cannot
configure a member of a peer group to override the inherited peer group
characteristic for outbound policy
Mode
Address Family Configuration, Router Configuration
56 ■
neighbor prefix-tree
JUNOSe 11.1.x Command Reference Guide N to Z