Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1310 / 1488

table-map
Syntax
table-map mapTag
For removing route maps for IS-IS IPv6 only:
no table-map
For removing route maps for all other cases:
no table-map [ mapTag ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Applies the specified route map to all BGP, IS-IS, OSPF, or RIP routes about to be
added to the IP routing table. The
no version halts application of the route map.
Options
mapTag —A string of up to 32 alphanumeric characters that specifies the name
of the route map; for each protocol, the route map can set only the following
values:
■
■
BGP—Distance, IP next hop, level, metric, metric type, route type, and tag
values
■
IS-IS—Distance, level, metric, metric type, origin, preference, route type,
and tag values; IS-IS IPv6 supports only a single route map
■
OSPF—Distance, metric, metric type, route type, and tag values
■
RIP—Distance, metric, and tag values
Mode
Address Family Configuration (BGP, IS-IS, RIP), Router Configuration (BGP, IS-IS,
OSPF, RIP)
1268 ■
table-map
JUNOSe 11.1.x Command Reference Guide N to Z