Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 102 / 1488

neighbor route-map
Syntax
neighbor { ipAddress | ipv6Address | peerGroupName } route-map mapTag
{ in | out }
no neighbor { ipAddress | ipv6Address | peerGroupName } route-map [ mapTag ]
{ in | out }
Release Information
Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
Description
Applies a route map to incoming or outgoing routes. If an outbound route map is
specified, BGP advertises only routes that match at least one section of the route
map. The
no version removes a route map.
Options
■
ipAddress —IP address of BGP neighbor
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of BGP peer group. If you specify a BGP peer group by
using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
■
mapTag —Name of the route map; a string of up to 32 alphanumeric characters
■
in—Applies route map to incoming routes
■
out—Applies route map to outgoing routes; you cannot configure a member of
a peer group to override the inherited peer group characteristic for outbound
policy
Mode
Address Family Configuration, Router Configuration
60 ■
neighbor route-map
JUNOSe 11.1.x Command Reference Guide N to Z