Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 530 / 1488

set distance
Syntax
set distance distance
no set distance
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Configures an administrative distance to apply to routes that match the route map.
The
no version removes the set clause from a route map.
NOTE: Setting a distance in a route map is useful only when it is set on a route being
installed into the routing table. Distance is used to establish preference between
routes to the same prefix to identify the best route to that prefix. Setting distance in
any other circumstance has no effect.
Options
■
distance —Administrative distance in the range 0–255
Mode
Route Map Configuration
488 ■
set distance
JUNOSe 11.1.x Command Reference Guide N to Z